Chemical pumps of «Х» and «ХЕ» types

Pumps of «Х» and «ХЕ» types with the capacity from 6.3 m3/hour to 400 m3/hour and pumping units on their basis are designed for supply of oil, oil light products, chemically active and slightly aggressive liquids which may cause corrosion of pump inner flowing part material not more than 0.1 mm/year, and neutral liquids.

The pumps and pumping units are manufactured for the areas with temperate and cold climate (temperature range -60°C – +45°C), category of location 2, 4 according to GOST 15150-69.

Pumps and pumping units are used for operation at explosion zones В-1ф, В-1г as per Regulations for the design and construction of electrical installations. They are designed for pumping of liquids the vapors of which can form explosive mixtures of II category, groups T2 and T3 as per GOST 12.1.011-78 belonging to hazard categories III and IV according to GOST 12.1.005-88.

Technical Data of «Х» type pumps

  Designation Rotational
speed
(synchr.),
rpm		 Capacity,
m³/hour		 Head,
m		 NPSH, m
no more		 Efficiency, % no less Power, kW Motor
pump unit pump unit N,
кВт		 n,
об/мин		 U,
V
Х50-32-125Д,К 1500 6,3 5 3,2 52 50 0,2 0,22 0,25 1500 380
3000 12,5 20 3,5 53 50 1,5 1,7 2,2 3000 380
Х50-32-160Д,К 1500 6,3 8 3,4 45 42 0,3 0,33 0,37 1500 380
Х50-32-200Д,К 1500 6,3 12,5 3,4 37 35 0,25 0,28 0,37 1500 380
3000 12,5 50 3,5 40 38 2 2,2 5,5 3000 380
Х65-40-200Д,К 1500 12,5 12,5 3,6 56 53 1,1 1,22 1,5 1500 380
3000 25 50 3,8 57 54 8,5 9,4 15 3000 380
АХ65-40-200К 3000 25 50 3,8 46 45 7 7,1 11 3000 380
Х65-40-250К 1500 12,5 20 3,4 34 30 1,8 2 2,2 1500 380
3000 25 80 3,8 36 34 14,3 15,7 15 3000 380
Х65-40-315К 1500 12,5 32 3,8 30 28 3 3,3 5,5 1500 380
АХ65-40-315К 3000 25 125 3,2 31 30 28 29 30 3000 380
Х65-50-160Д,К 1500 12,5 8 3,4 55 52 0,5 0,55 0,75 1500 380
3000 25 32 3,8 60 56 4 4,4 5,5 3000 380
Х100-65-200Д,К 1500 50 12,5 4,4 70 61 2,4 2,7 3 1500 380
3000 100 50 4,5 71 62 19,5 22 45 3000 380
Х100-65-250Д,К 1500 50 20 5 66 62 4,1 4,5 11 1500 380
3000 100 80 6 66 62 32,8 36,5 45 3000 380
Х100-65-315К 1500 50 32 6 58 54 7,5 8,3 11 1500 380
3000 100 125 8 58 54 60 67 75 3000 380
Х125-80-200Д 1500 80 12,5 5 72 63 3,6 4 5,5 1500 380
3000 160 50 5,5 73 64 28,6 32,5 45 3000 380
Х125-100-400Д 1500 125 50 3,5 64 61 24,8 27,5 37 1500 380
Х150-125-400Д,К 1500 200 50 3,8 71 62 38,3 43,5 55 3000 380
Х200-150-315К 1500 50 32 6 58 54 7,5 8,3 11 1500 380
3000 100 125 8 58 54 60 67 75 3000 380
Х125-80-200Д 1500 80 12,5 5 72 63 3,6 4 5,5 1500 380
3000 160 50 5,5 73 64 28,6 32,5 45 3000 380
Х125-100-400Д 1500 125 50 3,5 64 61 24,8 27,5 37 1500 380
Х150-125-400Д,К 1500 200 50 3,8 71 62 38,3 43,5 55 3000 380
Х200-150-315К 1500 315 32 3,6 82 80 33,5 36 55 1500 380
Х200-150-315А,Т 1500 315 32 3,6 82 80 33,5 36 55 1500 380
Х200-150-400Д 1500 400 50 4,2 70 61 80 86 90 1500 380
Х200-150-400А,Т 1500 400 50 4,2 70 61 80 86 90 1500 380
Х250-200-315А,Т 1500 500 32 5 80 78 54 60 90 1500 380

Technical Data of «ХЕ» type pumps

  Designation Rotational
speed
(synchr.),
rpm		 Capacity,
m³/hour		 Head,
m		 NPSH, m
no more		 Efficiency, % no less Power, kW Motor
pump unit pump unit N,
кВт		 n,
об/мин		 U,
V
ХЕ50-32-125Д 1500 6,3 5 3,2 52 50 0,2 0,22 0,25 1500 380
3000 12,5 20 3,5 53 50 1,5 1,7 3 3000 380
ХЕ50-32-200К 3000 12,5 50 3,5 40 38 2 2,2 4 3000 380
ХЕ65-40-315Д 3000 25 125 3,2 31 30 28 29 30 3000 380
ХЕ65-50160Д 1500 12,5 8 3,4 55 52 0,5 0,5 0,75 1500 380
3000 25 32 3,8 60 56 4 4,4 5,5 3000 380
ХЕ80-50-200Д 1500 25 12,5 3,4 62 59 1,35 1,4 1,5 1500 380
3000 50 50 3,8 63 60 10 10,8 15 3000 380
ХЕ100-65-200Д 1500 50 12,5 4,4 70 61 2,4 2,7 3 1500 380
3000 100 50 4,5 71 62 19,5 22 45 3000 380
ХЕ100-65-315Д 1500 50 12,5 4,4 70 61 2,4 2,7 3 1500 380
3000 100 50 4,5 71 62 19,5 22 45 3000 380
ХЕ125-100-400К 1500 125 50 3,5 64 61 24,8 27,5 30 1500 380
ХЕ200-150-400Д 1500 400 50 4,2 70 61 80 86 90 1500 380

The example of pump and pumping unit designation

«Pump ХЕ 100-65-200-100/50-Д-5 ТУ У3.19-05747991-096-99»
«Electric driven pumping unit ХЕ 100-65-200-100/50-Д-5 ТУ У3.19-05747991-096-99»

The same with modernization
«Electric driven pumping unit 1ХЕ 100-65-200-100/50-Д-5 ТУ У319-05747991-096-99»
where

ХЕ Х – horizontal, cradle-mounted, single stage pump with axial inlet and radial outlet, with support placed on casing. The pumps are designed for supply of chemically active, neutral and slightly aggressive liquids
АХ – the same with open impeller;
ХЕ – the same designed for supply of flammable and highly inflammable liquids.
Pumps are manufactured in versions which differ in material and seal type:
Д – material of inner flowing part:
А – carbon steel;
Д – steel 20Х13Л;
Т – titanium alloy ВТ 1-0;
К – steel 12Х18Н10Т;
5 – the type of rotor end seal:
5- single end seal;
55 – doubled end seal;
С – gland seal;
СД – doubled gland seal (with с hydraulic seal).

The Company improves the pumping equipment and equips pumping units with the motors of different manufactures. Thereby when ordering, please specify overall and mounting dimensions and required parameters according to the recommended form of a Questionnaire.

When ordering the equipment which is been interested in, please fill in   the Questionnaire.